Bloggegevens

Abrasive Flow Machine Uses Diamond Fine Powder,Silicon Carbide Powder or other Abrasives Mixed Into Polymer Elastic as a soft medium.Abrasive Flow Machine Uses Diamond Fine Powder,- Silicon Carbide Powder orotherAbrasives Mixed Into Polymer Elastic as a soft medium.The abrasives flow up and down through the inner holesor over the machined surface to achieve surface polishing.
Especially suitable forall kinds of mould andirregular shape tiny cavities.The abrasives flow up and down through the inner holesor over the machined surface to achieve surface polishing.Especially suitable for all kinds of mould and irregular shape tiny cavities.Abrasive flow is not only a device,but also a system engineering!It includes equipment,abrasives,tooling fixtures,and important detail design and experience,which are not only reflected in the final effect and efficiency,but also reflected in the long-term stable use,and can help customers save a lot of trial and error costs!
The one-way automatic circulating fluid polishing machine uses the lower hydraulic cylinder to move and squeeze,so thatThe soft abrasive is extruded from the same inlet and from other channels,and repeatedly ground toTo achieve the purpose of polishing,deburring and chamfering.
This processing method is applicable to all kinds of curved flow channels,elbows or slender pipes,and large internalCavity and other workpieces that are not easy to polish,or precision parts to remove cross hole burrs,is the most importantSuitable processing method.And the grinding direction is consistent,which can effectively improvePerformance,quality and service life of the die or workpiece.After polishing,the finish can reach the mirror grade,and the best surface roughness can reach ra0.2μm.

Traditional machining methods often struggle to address the challenge of polishing complex, irregularly shaped internal cavities. However, abrasive flow technology offers a perfect solution. This technology's unique rheological properties allow the abrasive to conform to any complex cavity geometry and flow channel, achieving uniform grinding and polishing without blind spots.
Whether it's a winding fuel injection flow channel, an aerospace component with complex internal ribs, or a hydraulic valve body with multi-directional cross-holes, the abrasive flow medium, driven by pressure, can fill the entire internal cavity surface. As the abrasive particles penetrate these hard-to-reach areas, they produce a precise and gentle cutting action, simultaneously deburring, chamfering, and mirror polishing the workpiece, while perfectly preserving the original geometric accuracy.
This technology completely overturns the traditional practice of manual or chemical polishing for complex internal surfaces. Instead, it enables automated processing with high efficiency, high consistency, and ultra-high repeatability, making it a crucial technology for overcoming the challenges of complex cavity surface finishing.

https://www.forkrobot.com
Email:Sales@nkbaler.com
WhatsApp:+86 15021631102